Dyson AB 14 Airblade dB2 Specification - Grey or White finish

Specification

  • Input voltage/Frequency: 220-240V 50 & 60 Hz
  • Rated power: 1600 W
  • Motor type: Dyson digital motor V4 – brushless DC Motor
  • Motor switching rate: 6,000 per second
  • Motor speed: 90,000 rpm
  • Operating temperature range: 0°– 40°C
  • Heater type: None
  • Standby power consumption: Less than 0.5 W

 

Construction

  • Casing construction: Polycarbonate-ABS casing
  • Antibacterial coating type: Contains antibacterial moulded additive in facia and blades. Can help prevent the growth of bacteria.
  • Colour finish: Grey or white
  • Light reflective value: 28.3
  • Galvanised steel back plate/mounting bracket
  • Exterior screw type: Anti-tamper M6 machine screw
  • Water ingress protection to IP35

 

Filter

  • HEPA filter (glass fibre and fleece prelayer)
  • Bacteria removal 99.9%

 

Operation

  • Touch-free infra-red activation
  • Hand dry time measurement: 10 seconds. (Measurement based on National Sanitation Foundation Protocol P.335)
  • Operation lock-out period: 30 seconds
  • Airspeed at apertures: 690km/h (430 mph)
  • Operating airflow: Up to 35 l/s

Guarantee

5 year parts, 1 year labour guarantee

 

Recommended installation heights from floor

  • Male X 1050mm Y 990mm Z 390mm
  • Female X 975mm Y 915mm Z 315mm
  • Child or disabled X 875mm Y 815mm Z 215mm

 

Machine dimensions

  • Height 661mm Width 303mm Depth 247mm
  • Minimum clearance
  • 200mm from floor; 50mm clearance either side and above machine.
  • Cable entry point from floor
  • Male 725mm
  • Female 650mm
  • Child or disabled 550mm